Description
Ford Ecoboost (2.3L) Piper Rally Camshafts suitable for the 2.3 Litre Ecoboost engine.
The 2.3L Ford Ecoboost engine was fitted to a wide range of Fords including the Focus RS, Focus ST, Explorer, Mustang and Ranger. It is also found in the Lincoln Corsair & MKC as well as used in kit cars and various forms of Motorsport.
Camshaft Specification
- Application: Rally
- Power Band: 3000-8000
- Duration Inlet: 272°
- Duration Exhaust: 268°
- Valve Inlet Lift: .443″ (11.25mm)
- Valve Exhaust Lift: .425″ (10.80mm)
- Timing Inlet: 7 – 85
- Timing Exhaust: 58 – 30
- Full Inlet Lift: 129°
- Full Exhaust Lift: 104°
- TDC Inlet Lift: .009″ (0.23mm)
- TDC Exhaust Lift: .082″ (2.08mm)
- Valve Inlet Clearance: .010″ (0.254mm)
- Valve Exhaust Clearance: .012″ (0.305mm)
For more information, please see the spec sheet below.
This Ford Ecoboost (2.3L) Piper Rally Camshafts are CNC ground from a new blank camshaft.
Please Note: These camshafts are not suitable use use with standard O.E valve springs. Piper recommend the use of their Single Valve Springs & Retainer Kit with these camshafts.
Spec Sheet
Ecoboost (2.3L) Rally Cams Spec Sheet
Estimated dispatch time within 5 working days.
Picture for illustration purposes only. Actual parts may differ slightly in appearance.
